High Arctic Energy Services L.P

THE BANFF
The Banff (460K) Hydraulic Workover Rig is a diesel powered hydraulic workover rig. This rig is capable of all drilling, workover and snubbing operations that are currently being conducted with conventional draw work type rigs. The Banff hydraulically moves the tubular components in and out of the wellbore with hydraulic rams, which in turn creates a very small operational footprint for this powerful rig. The rig is capable of lifting 460,000 lbs with these hydraulic cylinders, and all pipe is picked up or laid down during pipe movement and positioned with a dual counterbalanced winch set-up and pipe slide eliminating all unnecessary safety risks. 460 K Snubbing Unit Hydraulic Jack / 12' stroke 2 Diesel 475hp Power Pack to operate 460K 22' overall height 5 sets 600K HAES 11" Full Open Slip Bowls (2 5/8"- 8 5/8" capability) 10,000 ft/lb hydraulic rotary table c/w rotation lock Lift Capacity 460,000 pounds Snub Capacity 226,000 pounds 16' x 11' Work Basket c/w all operating controls All Pipe handling equipment 2 3/8" to 7" inclusive 2 Built in 2" 10,000 psi Stand Pipe Martin Decker Gauges ÐWell Head Pressure, Equalize Pressure, Pump Pressure Power Tongs 5 1/2" White Bear Tongs. Model 5525 0Ð25,000 ft/lbs torque range Multi-bit Tong Jaws (1/2" Variance ) Hydraulic lifting cylinder Pipe Handling Equipment Gin Pole w/ dual counterbalance winches, 5,000 lb. Capacity 2,500 lb. per winch V-door Pipe Racks Catwalk Lift Nubbins for work strings Pumping Equipment HT 400 475hp Tri-plex pump 10,000 psi 8 valve x 2 1/16 Cameron valve manifold. 300 bbl mud tank Pipe Basket w/ 2" 5,000 psi line pipe 150 ft, chicksan swivels, crossovers and miscellaneous connections, all piping 1502 WECO connections Accumulator Accumulator 3,000/1,500 psi High/Low 6 station by-pass 300 gal Blowout Preventors As directed by job requirements Fuel Tank 2,500 gallons Rated lifting eyes for loading while filled Integral drip trays front for transfer pump and hose, back for in use barrel area and barrel pump Top of the fuel skid can store up to 12Ð45 gallon barrels with tie down points spaced for same Generators Skid 2,250 kva Volvo-Penta generators Setup to run individually or sequenced as required 460 voltsÐ60hz Distribution panel and transformers are mounted conveniently between the generators on the skid 50 hp compressor and distribution manifold are also mounted on the skid Stairway Tower Transported collapsed in two stacks 3m x 3m x 2m in height Assembled by two men in three hours with the use of a small crane (5 tons @ 30meters) When erected has a height of 25 meters and is free standing All components store within the two stacks including stairway sections and handrails for all levels More sections can be added to accommodate taller stack configurations, when tower exceeds 35 meters guide wire must be installed Non-Ground Disturbance Anchors Eliminates the need of ground disturbance for anchor points of guide wires Anchor weighs 10 tons Frame holds blocks securely and has an engineered lifting eye for loading/unloading Auxiliary Equipment Spares Container with all BOP, Snubbing Unit, Pump & Mechanical spares Workshop with welder and cutting torch Complete lighting system Change Building Safety Equipment Complete Egress System from Work Basket to Deck 4 60 lb. ABC Fire Extinguishers Full 1st Aid Kit w/ rescue stretcher, splints and blankets All equipment meets or exceeds all existing standards. High Arctic Energy Services L.P. maintains an ISO 9001:2000 Company Certification.

THE BANFF

The Banff (460K) Hydraulic Workover Rig is a diesel powered hydraulic workover rig. This rig is capable of all drilling, workover and snubbing operations that are currently being conducted with conventional draw work type rigs. The Banff hydraulically moves the tubular components in and out of the wellbore with hydraulic rams, which in turn creates a very small operational footprint for this powerful rig. The rig is capable of lifting 460,000 lbs with these hydraulic cylinders, and all pipe is picked up or laid down during pipe movement and positioned with a dual counterbalanced winch set-up and pipe slide eliminating all unnecessary safety risks.

460 K Snubbing Unit

Hydraulic Jack / 12' stroke
2 Diesel 475hp Power Pack to operate 460K
22' overall height
5 sets 600K HAES 11" Full Open Slip Bowls (2 5/8"- 8 5/8" capability)
10,000 ft/lb hydraulic rotary table c/w rotation lock
Lift Capacity 460,000 pounds
Snub Capacity 226,000 pounds
16' x 11' Work Basket c/w all operating controls
All Pipe handling equipment 2 3/8" to 7" inclusive
2 Built in 2" 10,000 psi Stand Pipe
Martin Decker Gauges ÐWell Head Pressure, Equalize Pressure, Pump Pressure

Power Tongs

5 1/2" White Bear Tongs. Model 5525
0Ð25,000 ft/lbs torque range
Multi-bit Tong Jaws (1/2" Variance )
Hydraulic lifting cylinder

Pipe Handling Equipment

Gin Pole w/ dual counterbalance winches, 5,000 lb. Capacity 2,500 lb. per winch
V-door
Pipe Racks
Catwalk
Lift Nubbins for work strings

Pumping Equipment

HT 400 475hp Tri-plex pump
10,000 psi 8 valve x 2 1/16 Cameron valve manifold.
300 bbl mud tank
Pipe Basket w/ 2" 5,000 psi line pipe 150 ft, chicksan swivels, crossovers and miscellaneous connections, all piping 1502 WECO connections

Accumulator

Accumulator 3,000/1,500 psi High/Low 6 station by-pass 300 gal

Blowout Preventors

As directed by job requirements

Fuel Tank

2,500 gallons
Rated lifting eyes for loading while filled
Integral drip trays front for transfer pump and hose, back for in use barrel area and barrel pump
Top of the fuel skid can store up to 12Ð45 gallon barrels with tie down points spaced for same

Generators Skid

2,250 kva Volvo-Penta generators
Setup to run individually or sequenced as required
460 voltsÐ60hz
Distribution panel and transformers are mounted conveniently between the generators on the skid
50 hp compressor and distribution manifold are also mounted on the skid

Stairway Tower

Transported collapsed in two stacks 3m x 3m x 2m in height
Assembled by two men in three hours with the use of a small crane (5 tons @ 30meters)
When erected has a height of 25 meters and is free standing
All components store within the two stacks including stairway sections and handrails for all levels
More sections can be added to accommodate taller stack configurations, when tower exceeds 35 meters guide wire must be installed

Non-Ground Disturbance Anchors

Eliminates the need of ground disturbance for anchor points of guide wires
Anchor weighs 10 tons
Frame holds blocks securely and has an engineered lifting eye for loading/unloading

Auxiliary Equipment

Spares Container with all BOP, Snubbing Unit, Pump & Mechanical spares
Workshop with welder and cutting torch
Complete lighting system
Change Building

Safety Equipment

Complete Egress System from Work Basket to Deck
4 60 lb. ABC Fire Extinguishers
Full 1st Aid Kit w/ rescue stretcher, splints and blankets

All equipment meets or exceeds all existing standards. High Arctic Energy Services L.P. maintains an ISO 9001:2000 Company Certification.